一种用于深空探测的Chirp变换频谱分析仪设计与实现

根据深空探测对频谱分析仪抗辐射、高分辨率、低功耗的需求，研究一种基于Chirp变换的高分辨率频谱分析仪设计及其实现.利用中心频率为1GHz、带宽为400MHz、色散时间为10μs的声表面波滤波器，提出了一种模拟和数字相结合的高分辨率频谱分析仪设计方案，并搭建原理实验系统完成了实测验证，其分析带宽为400MHz，频率分辨率达到152kHz，功耗约为3.6W.分析了压缩线器件非理想特性对频率分辨率的影响，利用实测压缩线频率响应特性获得幅度和相位补偿曲线，对展宽线信号进行幅相失配补偿.仿真结果表明，该补偿方法可将频率分辨率提高至108kHz.      

A concept mission for the Stellar Population and Evolution with Cubesats (SPEC)

Binary or multiple stellar systems, constituting almost a third of the content of the Milky Way, represent a high priority astronomical target due to their repercussions on the stellar dynamical and evolutionary parameters. Moreover the spectral study of such class of stars allows to better constrain the evolutionary theories of the Galactic stellar populations. By resolving the members of stellar systems through photometric observations we are able to perform more detailed measurements to infer their mass. In this paper we investigate the feasibility of a cubesat based mission including an optical payload to directly optically discriminate the members of a selected sample of binary systems. The scientific targets, consisting 11?M class dwarf stars binary systems, have been extracted from the already studied Riaz catalogue. These subset has been selected considering the star distance, the members angular separation, and the distance from the Galactic plane (due to limit the background and foreground contamination). The satellite concept is based on a 6 unit Cubesat embedding some commercial off the shelf components and an ad hoc designed optical payload occupying almost 4 units. The optical configuration has been chosen in order to fit the angular resolution requirements, as derived from the target characteristics. Moreover, according to the optical analysis and the computed field of view some requirements on the attitude control system have been inferred and fulfilled by the component selection. The paper is organized as in the following: a brief scientific introduction is made; consequently the project is described with particular attention to the optical design and the standard sub-systems; finally the conclusions are drawn and the future perspectives are investigated.     

Local Path Planning and Tracking Control of Vehicle Collision Avoidance System

Automotive collision avoidance technology can effectively avoid the accidents caused by dangerous traffic conditions or driver's manipulation errors.Moreover,it can promote the development of autonomous driving for intelligent vehicle in intelligent transportation.We present a collision avoidance system,which is composed of an evasive trajectory planner and a path following controller.Considering the stability of the vehicle in the conflict-free process,the evasive trajectory planner is designed by polynomial parametric method and optimized by genetic algorithm.The path following controller is proposed to make the car drive along the designed path by controlling the vehicle's lateral movement.Simulation results show that the vehicle with the proposed controller has good stability in the collision process,and it can ensure the vehicle driving in accordance with the planned trajectory at different speeds.The research results can provide a certain basis for the research and development of automotive collision avoidance technology.     

脉冲电流大厚度电解线切割加工试验

航空航天难加工材料直纹面构件的高精度高表面完整性加工已经成为制造领域普遍关注和亟需解决的难题，电解线切割加工在高表面完整性要求加工场合上具有原理性优势。建立脉冲电流电解线切割加工模型，分析了工件厚度变化带来的影响。试验结果表明：随着工件厚度增加，电解液电阻减小，工件两端极间电压减小，加工缝宽变窄；双电层时间常数增大，脉宽时间内充电所能达到的电位降低，有效加工时间变短，平均电流密度较低；脉冲频率大于20 kHz时，最大进给速度随频率增加而快速减小，低于20 kHz时，最大加工速度差别较小。最后，采用脉冲频率20 kHz，以进给速度4 μm/s稳定加工出20 mm厚榫头/榫槽结构，表面粗糙度约为0.449 4 μm，表面质量、加工效率明显高于100 kHz加工效果。     

主辅拦截器协同制导方法研究

随着现代导弹技术的发展,导弹的突防能力越来越强,对导弹的防御难度也逐渐增大。为增强拦截器的杀伤力并降低成本,可利用主辅拦截器协同制导对目标进行拦截。建立了拦截器与目标的相对运动模型,通过对运动方程进行线性化分析,发现协同制导问题实质为具有终端时间限制条件的导引问题,该问题可转化为线性化系统的最优控制问题。利用最优控制中的极小值原理设计了时间协同制导律。仿真结果表明:该制导律可实现多枚拦截器在同一时刻拦截目标的协同制导要求。     

纤维织物超高速碰撞热-力学模型与分析

A new thermo mechanical model for fiber fabric of hypervelocity impact is established by using the Johnson Cook model, the Gruneisen equation of state and the FEM SPH coupling algorithm, while some new factors are taken into account such as the heat generation, strain rate strengthening and high temperature softening of materials. Mechanical and thermal information could be obtained with the model, such as penetration, fragmentation, stress and strain, heat generation and temperature field of fiber fabric. The analysis results are in good agreement with the experimental results.     

一种适用于封闭场景下的遥测信号接收方法

常规的遥测信号接收多是在开阔场景进行,被测对象除了在起飞或降落时短暂低仰角,大部分时间其信号是视距传输,其遥测信道近似于高斯白噪声信道。随着遥测应用场景的逐步扩展,封闭场景下的遥测需求逐步被提出,应用模式和信道条件发生了巨大变化。针对某封闭场景,分析常规遥测接收方法存在的一些问题,提出一种双天线加盲均衡的分集合成和接力接收方案,有效解决了封闭场景下的遥测信号中断问题。方案成功应用于某测试系统,实测结果表明,方案能够极大提升遥测系统的健壮性。     

压气机转子叶片的抑颤设计(“两机”专刊)

以一高压压气机转子叶片为对象开展了叶片抑颤工程设计方法研究,采用基于相位延迟边界条件的能量法和特征值法对原转子叶片模型的气动弹性稳定性进行评估,通过分析近失速工况下的非定常气动功密度分布,对叶片安装角沿径向分布、弦长和叶尖间隙等设计参数进行调整,以明确各参数对气动弹性稳定性的影响,最终达到提高气动阻尼的目的。研究结果表明：叶尖间隙对气动阻尼的影响较大,安装角次之,弦长影响相对较小。叶片气动阻尼随叶尖间隙的变化并非单调,而是存在一个叶尖间隙使其气动阻尼最小,即叶片气动弹性稳定性最差。减小进口气流攻角和增加折合频率,能够提高气动阻尼,设计中可以通过调节安装角来减小气流攻角,增加弦长来增大折合频率。